Fully automatic steam heating dewaxing pot

Fully automatic steam heating dewaxing pot

Payment Type:	T/T
Incoterm:	FOB,CIF,EXW
Min. Order:	1 Piece/Pieces
Transportation:	Ocean,Land
Port:	qingdao
option:	YN-DTF-1600Z

$29120- /Piece/Pieces

29120USD

Contact Now

Product Attributes
Packaging & Delivery
Product Description
Supply Ability & Additional Information

Product Attributes

Model No.: YN-DTF-1600Z

Brand: Enon

Place Of Origin: China

Old And New: New

Video Factory Inspection: Provided

Mechanical Test Report: Provided

Marketing Type: New Product 2020

Core Component Warranty Period: 1 Year

Core Components: Plc

Warranty Period: 1 Year

Core Selling Point: Easy To Operate

Out-of-warranty Service: Video Technical Support, Online Support, Spare Parts, Field Maintenance And Repair Service

Where To Provide Local Services (in Which Countries Are There Overseas Service Outlets): None

Showroom Location (in Which Countries Are There Sample Rooms Overseas): None

Applicable Industry: Manufacturing Plant, Other

Packaging & Delivery

Selling Units:	Piece/Pieces
Package Type:	Wooden box packaging
Picture Example:

The file is encrypted. Please fill in the following information to continue accessing it

Product Description

1.Description
DTF electric heating steam dewaxing kettle is one of the complete precision Casting Equipment produced by our company. It is mainly used for the dewaxing process of precision casting middle mold shell. This machine summarizes the advantages of many similar products at home and abroad in design and manufacturing, strives for safety and reliability, advanced and practical, has the characteristics of fast temperature rise, rapid dewaxing, etc. It is currently an ideal dewaxing equipment with good environmental protection conditions and high thermal efficiency.

2.Dewaxing operation process

1. Mold Loading Specifications

Before loading, ensure the molds are intact and dry. Avoid placing molds with moisture or excessive humidity inside the kettle.

Arrange the molds appropriately according to size and quantity, ensuring uniform spacing (at least 5 cm) between them to avoid over-stacked molds that could impede steam circulation. The mold height should not exceed 80% of the vessel depth to prevent contact with the top of the kettle or heating elements.

If using a push-type mold rack, push it smoothly into the kettle, ensuring alignment with the positioning device inside the kettle to prevent misalignment and leaks. Automatic loading and unloading trolleys must be precisely positioned by the control system and locked after confirmation.

2. Door Closing and Sealing Inspection

Before closing the door, clean the kettle opening sealing surface and the door seal to ensure there are no debris or wax residue, and that the seal is intact and free of aging or damage.

Slowly close the door and turn the locking handle (or activate the pneumatic or electric locking mechanism) to ensure uniform tightening until the sealing surfaces are firmly seated. Confirm there are no leaks through the observation window or by performing a seal test (allowing a small amount of compressed air).

3. Process Parameter Setting and Startup

Based on the mold material, wax type, and other process requirements, set the dewaxing parameters on the PLC touch screen: operating pressure 0.75-0.9 MPa (must not exceed the design pressure), operating temperature 158-180°C (adjusted based on the wax melting point, usually 20-30°C above the melting point), and dewaxing time (generally 30-60 minutes, adjusted based on mold size).

After confirming the parameters are correct, start the automatic operation program. The equipment will automatically complete water replenishment, temperature increase, and pressure increase according to the preset process:

During the heating phase: Observe the heating system's operating status and record the heating rate (normally reaching 100°C within 5-10 minutes). If the temperature rise is too slow, stop the machine and inspect the heating elements or temperature control system. During the pressure-raising phase: Closely monitor the pressure gauge. The inflation equilibration time must meet equipment requirements (≤10 seconds for Φ1000×1100mm, ≤15 seconds for Φ1200×1500mm). Pressure fluctuations must be controlled within ±0.02MPa. If this limit is exceeded, the equipment should automatically alarm and adjust.

3.Technical parameter

Model	YN-DTF-1600Z
working pressure	0.85MPa
working temperature	185ºC
Design pressure	0.95MPa
Voltage regulating range	0~0.85MPa
Boost rate	0.6MPa/5s
power	380V/50Hz 303kw

Supply Ability & Additional Information

Packaging: Wooden box packaging

Transportation: Ocean,Land

Supply Ability: 120piece/year

Certificate: ISO 9001:2015

Port: qingdao

Payment Type: T/T

Incoterm: FOB,CIF,EXW